Nissan Navara D23 (NP300) Single & King Cab (Leaf Spring Rear) Variants Suspension Upgrades

1

Steering Rack & Pinion Mount Bush Kit

SPF4660K

Suits Thai Built models (VIN # M for Thailand Models)

Quantity required: 1

£85.81 (inc. VAT)

In Stock — Despatches: 1-3 days

Kit Includes: 5 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:

Fitting Time: 2hrs 30mins

Wheel-alignment required after fitment

2

Strut Top Spacer Kit

TRC008-6

Spacer Sleeve, suspension strut mount.

Raises vehicle approximately 10-12mm.

Quantity required: 1

£107.48 (inc. VAT)

In Stock — Despatches: 1-3 days

Fitment Difficulty:

Fitting Time: 3hrs 30mins

Wheel-alignment required after fitment

3

ReadyStrut Top Caps

RS001K

Strut Cap, Spring Seat, Nuts & Washers

Quantity required: 1

£145.18 (inc. VAT)

Available to Order

4

Upper Control Arm Kit for Lifted Vehicles

A

Fixed Offset

TRC6540

Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber (depending on height of lift)

Quantity required: 1

£634.30 (inc. VAT)

In Stock — Despatches: Immediately

Fitment Difficulty:

Fitting Time: 3hrs

Wheel-alignment required after fitment

B

Adjustable Offset

TRC540

Alignment Correction. Supplied with Camber & Caster Adjustable Ball Joints. Fitted with SuperPro Bushings.

These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2-inch lifted vehicle. However, it is important to note that a 2-inch block lift does not necessarily translate to a ride height change of 2 inches (in fact, it's likely to be more due to the way it works). The only way to be sure how much your vehicle has been lifted is for the correct measurements to be taken before and after fitting the lift which should be done as a matter of course when doing any suspension work. If you do not know the before and after measurements, you may need the two bushes mentioned below to correct alignment.

Anything in excess of 2-inches of lift we would recommend fitting double-offset bushes (SPF4784XK) and (SPF4786XK) to achieve optimal alignment settings.

Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop.

Key Features

Increased articulation, perfect for the off road environment
In-built camber and caster change to suit lifted vehicle
Provides for camber and caster adjustment using an adjustable ball joint
Increased clearance between spring and Control Arm at full articulation
SuperPro Bushings
Made in Australia

Quantity required: 1

Please ask for pricing

Available to Order

Kit Includes: 1 x

Fitment Difficulty:

Fitting Time: 3hrs

Wheel-alignment required after fitment

5

Control Arm Lower-Inner Bush Kit

A

Standard Alignment Kit

SPF4785K

Standard replacement

Quantity required: 1

£265.70 (inc. VAT)

In Stock — Despatches: 1-3 days

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes

Fitment Difficulty:

Fitting Time: 4hrs

Wheel-alignment required after fitment

B

Double-Offset Alignment Kit

SPF4786K

4 x offset bushings & 4 x Standard tubes

Quantity required: 1

£272.89 (inc. VAT)

In Stock — Despatches: 1-3 days

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes

Fitment Difficulty:

Fitting Time: 4hrs

Wheel-alignment required after fitment

C

Extra Double-Offset Alignment Kit

SPF4786XK

4 x offset bushings & 4 x offset tubes, for use where max adjustment is needed

Quantity required: 1

£315.96 (inc. VAT)

In Stock — Despatches: 1-3 days

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes

Fitment Difficulty:

Fitting Time: 4hrs

Wheel-alignment required after fitment

6

Control Arm Upper-Inner Bush Kit

A

Standard Alignment Kit

SPF4784K

Standard replacement

Quantity required: 1

£251.34 (inc. VAT)

In Stock — Despatches: 1-3 days

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes

Fitment Difficulty:

Fitting Time: 4hrs

Wheel-alignment required after fitment

B

Camber-Adjustable Kit

SPF4784XK

Offset tubes to aid in camber adjustment in raised vehicles

Quantity required: 1

£265.70 (inc. VAT)

In Stock — Despatches: 1-3 days

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes

Fitment Difficulty:

Fitting Time: 4hrs

Wheel-alignment required after fitment

7

Left-Hand Anti-Roll Bar Link

TRC4030L

Standard replacement

Quantity required: 1

Please ask for pricing

Available to Order

Kit Includes: 1 x Link

Fitment Difficulty:

Fitting Time: 30mins

Wheel-alignment required after fitment

8

Right-Hand Anti-Roll Bar Link

TRC4030R

Standard replacement

Quantity required: 1

Please ask for pricing

Available to Order

Kit Includes: 1 x Link

Fitment Difficulty:

Fitting Time: 30mins

Wheel-alignment required after fitment

9

Heavy-Duty Adjustable Anti-Roll Bar Links

TRC1225

Ideal for lifted vehicles. 25mm long Thread. 12mm Ball Joint Adjustable Link. Min length 75mm, max length 85mm

Quantity required: 1

£136.63 (inc. VAT)

In Stock — Despatches: 1-3 days

Kit Includes: 2 x Links

Fitment Difficulty:

Fitting Time: 1hr

10

Greaseable Shackle, Pin and Bush Kit

KIT0211SK

Contains Greasable Shackles and Fixed Pins with all SuperPro Bushings
The Shackles and Fixed Pins are often overlooked when upgrading the suspension of a 4WD.
Original shackles and fixed pins corrode and destroy the bushings and it is the leaf spring bushings that stabilise the movement of the rear axle.
Worn or inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle leading to the vehicle 'wandering' all over the road and be unstable under heavy braking.
This can be especially noticeable carrying a load or towing a boat or caravan.
By fitting the complete package of Greasable Shackles, Fixed Pins and Bush Kit the rear end of any 4WD will handle just about anything that is throw at it!

Quantity required: 1

Please ask for pricing

Available to Order

Fitment Difficulty:

Fitting Time: 2hrs

Wheel-alignment required after fitment

11

Complete Rear Leaf Spring Bush Kit

KIT0211K

These bushings are often overlooked when upgrading the suspension of a 4WD.
Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle.
It also causes the vehicle to "wander" all over the road and be unstable under heavy braking.
This can be especially noticeable carrying a load or towing a boat or caravan.
The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads.
By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it!

Quantity required: 1

Please ask for pricing

Available to Order

Fitment Difficulty:

Fitting Time: 2hrs

Wheel-alignment required after fitment

12

Greaseable Pin and Bush Kit (Front Spring Eyes)

SPF4461K

Quantity required: 1

£200.09 (inc. VAT)

In Stock — Despatches: Immediately

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Plates

13

Spring Front Eye Bush Kit

SPF2766K

See special instruction sheet included in kit at fitment stage.

Quantity required: 1

£76.16 (inc. VAT)

In Stock — Despatches: 1-3 days

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:

Fitting Time: 2hrs

Wheel-alignment required after fitment

14

Spring Rear Eye Bush Kit

SPF2767K

Quantity required: 1

£42.90 (inc. VAT)

In Stock — Despatches: 1-3 days

Kit Includes: 4 x Polyurethane Bushes

Fitment Difficulty:

Fitting Time: 2hrs

Wheel-alignment required after fitment

15

22mm Heavy Duty 3 Position Blade Adjustable Anti-Roll Bar

RC0080RZ-22

Anti-Roll Bar Kit includes Adjustable Anti-Roll Bar Links and D-Bushes

Quantity required: 1

Please ask for pricing

Available to Order

Kit Includes: 1 x Anti-Roll Bar, 2 x Polyurethane Bushes, 2 x Links

Fitment Difficulty:

Fitting Time: 1hr 30mins

16

Anti-Roll Bar Link Kit

A

Cut-To-Length

TRC4007

Quantity required: 2

£40.87 (inc. VAT)

In Stock — Despatches: 1-3 days

Kit Includes: 1 x Link

Fitment Difficulty:

Fitting Time: 30mins

B

Heavy-Duty-Adjustable

TRC12200

12mm Ball Joint Adjustable Link

Quantity required: 1

£193.54 (inc. VAT)

In Stock — Despatches: 1-3 days

Kit Includes: 2 x Links

Fitment Difficulty:

Fitting Time: 1hr

C

Quick-Release Anti-Roll Bar Links - Heavy Duty Extended

TRC4304

SuperPro's heavy-duty extended thread sway bar links are designed and manufactured to suit lifted Vehicles from 2-8 inches.

They are designed to allow you to effectively trim the anti-roll bar links to your desired length to provide adequate tail shaft clearance and anti-roll bar alignment.

Manufactured from a heavy-duty 16mm rod our anti-roll bar links offer increased strength and stud articulation, providing for less stress on the anti-roll bar links during wheel articulation.

Quantity required: 2

£98.64 (inc. VAT)

In Stock — Despatches: 1-3 days

Kit Includes: 1 x Link

Fitment Difficulty:

Fitting Time: 30mins

PRODUCT RANGES:

SELECT YOUR VEHICLE:

OR, SELECT VEHICLE MANUFACTURER:

You are Viewing