Ford Focus MK2 2.5 RS 500 Suspension Upgrades

1

Engine Front Torque Arm

The torque arm assists in controlling the engine and drivetrain forward and aft twisting motion. The torque arm is inherently soft due to the high compliance rubber bushing design and was built for comfort and not responsiveness or feel. Whiteline's torque arm mount bushing is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology this eliminates the slop, twisting and shudder found in the OEM rubber bushings allowing for a faster, positive, responsive feel of power delivery on and off the throttle.

Quantity required: 1

£250.97 (inc. VAT)

In Stock — Despatches: Immediately

2

Engine Mount Insert Kit

SPF3981K

The insert fits into the voids of the original mounting bush and takes out some of the engine movement under acceleration and deceleration. This results in reduced stress on associated components (such as the exhaust system). Our insert has been caresfully developed to give greater control without introducing Noise, Vibration and Harshness into the cabin. Focus RS and ST Only

Quantity required: 1

£39.95 (inc. VAT)

In Stock — Despatches: Immediately

Kit Includes: 1 x Polyurethane Bush

3

Front and Rear Anti-Roll Bar Upgrade Kit

BFK004

Important Notes: Contains BMF58X, BMR92Z and KLC142 - essential to 'Activate more grip'

Engineered to 'Activate More Grip', BFK004 is a packaged solution designed to improve performance and enhance the driving experience of your vehicle. Boasting a 26mm non-adjustable front Anti-Roll bar and 24mm rear 3-point adjustable Anti-Roll bar, the kit is completed with high-quality Anti-Roll bar links and mounting accessories that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Anti-Roll Bar Kit.

Quantity required: 1

£720.24 (inc. VAT)

In Stock — Despatches: Immediately

4

Front And Rear Suspension Bush Kit

A

Standard Alignment

KIT0169K

Kit Includes: 1X SPF3315K, 1XSPF3368K, 1 x SPF3466K, 1X SPF2323K, 1X SPF2324K, 2X SPF2325K.

Quantity required: 1

Please ask for pricing

Available to Order

B

Caster & Camber Adjustable

KIT0170K

Kit Includes: 1X SPF3315K, 1XSPF3370K, 1 x SPF3466K, 1X SPF2323K, 1X SPF2324K, 2X SPF2326K.

Quantity required: 1

Please ask for pricing

Available to Order

5

Front Anti-Roll Bar Upgrade

A

26mm Non-Adjustable

BMF58X

Important Notes: 26mm - non-adjustable.

Engineered to 'Activate More Grip', Anti-Roll bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres, increasing cornering grip and improving outright performance. This Whiteline 26mm fixed position Anti-Roll bar = more grip = better handling = outright performance - it's the best dollar-for-dollar handling improvement you can make to your vehicle. Benefits extend to handling, safety and tyre wear improvements without affecting ride quality or comfort.

Quantity required: 1

£363.84 (inc. VAT)

In Stock — Despatches: Immediately

B

27mm Non-Adjustable

BMF58XX

Important Notes: 27mm - non-adjustable.

Engineered to 'Activate More Grip', Anti-Roll bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres, increasing cornering grip and improving outright performance. This Whiteline 27mm fixed position Anti-Roll bar = more grip = better handling = outright performance - it's the best dollar-for-dollar handling improvement you can make to your vehicle. Benefits extend to handling, safety and tyre wear improvements without affecting ride quality or comfort.

Quantity required: 1

Please ask for pricing

Available to Order

6

Adjustable Front Anti-Roll Bar Links

KLC142

Adjustable extra heavy-duty links.

Not many enthusiasts know that OE and, more importantly, aftermarket Anti-Roll bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable Anti-Roll bar links are engineered to be up to the task with top spec, lightweight componentry combined with a window of adjustability, eliminating Anti-Roll bar preload on installation but, most importantly, ensuring the maximum output of the Anti-Roll bar for improved grip and better handling.

Quantity required: 1

£185.64 (inc. VAT)

In Stock — Despatches: Immediately

7

Control Arm Lower-Inner Front Bush Kit

SPF3115K

14mm Bolt - ST & RS

Quantity required: 1

£83.83 (inc. VAT)

In Stock — Despatches: Immediately

Kit Includes: 2 x Steel Tubes, 4 x Polyurethane Bushes

8

Control Arm Lower-Inner Rear Bush

A

Standard Alignment Settings

SPF3368K

Standard replacement - fits OEM bracket. If the original bracket is in poor condition or shows any evidence of stretching SPF4653K which includes a replacement bracket should be used.

Quantity required: 1

£199.88 (inc. VAT)

In Stock — Despatches: 1-3 days

Kit Includes: 2 x Steel Tubes, 1 x Instruction Sheet, 2 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes

B

Standard Alignment Settings with Bracket and Bolts

SPF4653K

Standard replacement. Offers quicker and easier fitment and is a solution when OEM brackets are stretched or in poor condition.

Quantity required: 1

£331.54 (inc. VAT)

In Stock — Despatches: Immediately

Kit Includes: 2 x Brackets

C

Steering-Pull Correction Kit

SPF3369K

1 x Offset 1 x Standard Bushings; Approx 0.5 Degree Caster change

Quantity required: 1

£199.88 (inc. VAT)

Available to Order

Kit Includes: 2 x Polyurethane Bushes, 2 x Sleeves, 2 x Washer(s) - used for Steel and / or Polyurethane, 1 x Instruction Sheet, 2 x Steel Tubes

D

Performance Alignment Correction Kit

SPF3370K

2 x Offset Bushings; Approx 0.5 Degree Caster change per bush

Quantity required: 1

£199.88 (inc. VAT)

In Stock — Despatches: Immediately

Kit Includes: 2 x Steel Tubes, 1 x Instruction Sheet, 2 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes

9

Anti-Roll Bar Mount To Chassis Bush

A

To Fit OE Bar

SPF3114-20K

OE bar with flats at bush mounting point

Quantity required: 1

Please ask for pricing

Available to Order

B

To Fit Aftermarket Round Bars

SPF2141-21K

Suits 21mm Aftermarket round bar. Measure bar diameter. 20 and 22mm options are also available (SPF2141-20K or SPF2141-22K)

Quantity required: 1

£47.50 (inc. VAT)

In Stock — Despatches: Immediately

Kit Includes: 2 x Polyurethane Bushes

10

Anti-Roll Bar Link Kit - Heavy Duty Adjustable

TRC1045

10mm Ball Joint Adjustable Link. Minimum Length 100mm. Maximum Length 120mm. 25mm Long Thread.

Quantity required: 1

£170.77 (inc. VAT)

In Stock — Despatches: Immediately

Kit Includes: 2 x Links

Fitment Difficulty:

Fitting Time: 1hr

11

24mm Adjustable Rear Anti-Roll Bar

BMR92Z

Important Notes: 24mm - 3-Point Adjustable

Engineered to 'Activate More Grip', Anti-Roll bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires, increasing cornering grip and improving outright performance. This Whiteline 24mm 4-point adjustable Anti-Roll bar = more grip = better handling = outright performance - it's the best dollar-for-dollar handling improvement you can make to your vehicle. In fact, benefits extend to handling, safety and tyre wear improvements without affecting ride quality or comfort.

Quantity required: 1

£295.51 (inc. VAT)

In Stock — Despatches: Immediately

12

Rear - Lower Front Control Arms

KTA137

Heavy-duty adjustable alloy rear lower front control arms are designed to allow for increased range with easy on-car toe adjustment. Low-compliance bushings are used to minimise NVH and maximise longevity.

Quantity required: 1

£384.61 (inc. VAT)

In Stock — Despatches: Immediately

13

Adjustable Control Arm Upper Rear

KTA138A

Heavy-duty control arms provide on-car adjustability of camber alignment. This results in improved traction, increased cornering grip and better tyre life - ultimately improving overall performance.

Quantity required: 1

£370.01 (inc. VAT)

Available to Order

14

Rear Control arms - Lower Front Arms

WA401

Important Notes: Supplied as a single arm so you will need to order two. Complete arm fitted with bushings.

Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings.

Quantity required: 2

£64.61 (inc. VAT)

Available to Order

15

Rear Control Arms - Upper Arms

WA402

Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market-leading Whiteline synthetic elastomer bushings.

Quantity required: 2

£93.12 (inc. VAT)

Available to Order

16

Blade Trailing Arm Front Bush

SPF3466K

Do not remove original shell 09/2002-05/2005

Quantity required: 1

£182.16 (inc. VAT)

In Stock — Despatches: 1-3 days

Kit Includes: 2 x Polyurethane Bushes, 1 x Instruction Sheet, 2 x Steel Tubes

17

Control Arm Lower - Inner & Outer Bush

SPF2323K

"Front Arm"

Quantity required: 1

£156.68 (inc. VAT)

In Stock — Despatches: Immediately

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes

18

Control Arm Lower - Inner & Outer Bush

SPF2324K

"Rear Arm"

Quantity required: 1

£189.92 (inc. VAT)

In Stock — Despatches: Immediately

Kit Includes: 4 x Sleeves, 4 x Steel Tubes, 4 x Polyurethane Bushes

19

Control Arm Upper-Inner and Outer Bush Kit

A

Standard Alignment Settings

SPF2325K

Standard camber settings

Quantity required: 2

£101.52 (inc. VAT)

In Stock — Despatches: 1-3 days

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves

B

Camber-Adjustable Kit

SPF2326K

Camber adjustable -1 to +1 degree adjustment with offsets in both positions

Quantity required: 2

£122.50 (inc. VAT)

In Stock — Despatches: Immediately

Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 2 x Polyurethane Bushes

20

Anti-Roll Bar Link Bush Kit

SPF2305K

Re-use original bolt

Quantity required: 1

£147.96 (inc. VAT)

In Stock — Despatches: Immediately

Kit Includes: 2 x Steel Tubes, 8 x Washer(s) - used for Steel and / or Polyurethane, 2 x Nuts, 8 x Polyurethane Bushes

21

Anti-Roll Bar Mount To Chassis Bush

A

To Fit OE Bar

SPF2578K

OE bar with flats at bush mounting point

Quantity required: 1

£64.58 (inc. VAT)

In Stock — Despatches: Immediately

Kit Includes: 4 x Polyurethane Bushes

B

To Fit Aftermarket Round Bars

SPF2141-21K

Aftermarket round bar. Measure bar diameter. 20 and 22mm available (SPF2141-20K or SPF2141-22K)

Quantity required: 1

£47.50 (inc. VAT)

In Stock — Despatches: Immediately

Kit Includes: 2 x Polyurethane Bushes

PRODUCT RANGES:

SELECT YOUR VEHICLE:

OR, SELECT VEHICLE MANUFACTURER:

You are Viewing