Reduce Tyre Wear
Control Arm Lower-Inner Bush Kit
SPF3039KQuantity required: 1
£125.40 (inc. VAT)
In Stock — Despatches: Immediately
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes
Control Arm Upper-Inner Bush Kit
SPF4384KQuantity required: 1
£82.66 (inc. VAT)
In Stock — Despatches: Immediately
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes
Control Arm Upper-Inner Bush Kit
SPF4385K+/- 0.75 Degrees Camber Adjustment available
Quantity required: 1
£104.52 (inc. VAT)
In Stock — Despatches: Immediately
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes
Engine Mount Insert Bush Kit
SPF2475KQuantity required: 1
£25.73 (inc. VAT)
Available to Order
Kit Includes: 1 x Polyurethane Bush
Steering Rack & Pinion Mount Bush Kit
SPF2699KQuantity required: 1
£110.40 (inc. VAT)
In Stock — Despatches: Immediately
Kit Includes: 5 x Polyurethane Bushes, 2 x Steel Tubes
Strut Bar To Chassis Mount Bush Kit
SPF3040KQuantity required: 1
£203.42 (inc. VAT)
In Stock — Despatches: 1-3 days
Kit Includes: 2 x Steel Tubes, 2 x Sleeves, 6 x Polyurethane Bushes
Strut Bar To Chassis Mount Bush Kit - Double Offset
SPF3042K1 Degree Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
Quantity required: 1
£202.08 (inc. VAT)
In Stock — Despatches: 1-3 days
Kit Includes: 2 x Steel Tubes, 2 x Sleeves, 6 x Polyurethane Bushes
Strut Bar To Chassis Mount Bush Kit - Single Offset
SPF3041K0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
Quantity required: 1
£203.42 (inc. VAT)
Available to Order
Kit Includes: 6 x Polyurethane Bushes, 2 x Sleeves, 2 x Steel Tubes
Crossmember Supplement Washers Bush Kit
SPF2520KQuantity required: 1
£131.04 (inc. VAT)
Available to Order
Kit Includes: 4 x Polyurethane Bushes, 4 x Washer(s) - used for Steel and / or Polyurethane
Crossmember Supplement Washers Bush Kit
SPF2553KQuantity required: 1
£49.27 (inc. VAT)
Available to Order
Kit Includes: 4 x Polyurethane Bushes
Subframe Rear Bush Kit
SPF3269KQuantity required: 1
£368.20 (inc. VAT)
In Stock — Despatches: 1-3 days
Kit Includes: 2 x Steel Tubes, 2 x Sleeves, 4 x Washer(s) - used for Steel and / or Polyurethane, 2 x Polyurethane Bushes
Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo










